Building VHF / UHF  antennas:

I mounted new antennas on the versa tower in September 2008:

This tower is a Versatower with 10m height

At the bottom you can see a waterproof box where all the connectors for antanna cables and rotor cables are mounted. Additionally the protectiv earth is connected inside of this box.

This picture shows the rotor for the short wave beam and below two Superamp pre-amps for 145 and  435 MHz of SSB-Electronics

A second rotor is mounted on the top. It is an elevation rotor used for satellite operation.

Currently I have one 10 ele Yagi antanna for the 2m band and a 15 ele Yagi for the 70cm band.

And the tower in it's full beauty: